There is no doubt about the fact that Netgear Nighthawk extenders are the best networking devices in the modern era. But, what is the use of a good extender when its performance has to go down the drain every now and then? If you are recently facing issues with your Nighthawk extender, then you know what we are referring to. However, thankfully, we have the best solution to any problem that you are facing with your extender. And that is, performing Netgear extender firmware update via http:192.168.1.250.
In this guide, you will gain knowledge regarding how the firmware update process can be executed before you can even bat an eye. Right when you are done updating the firmware of your device, you will see its performance going from 10 to 100. Thus, read on.
How to Perform Netgear Extender Firmware Update?
For your information, there are two different ways through which you can execute the Netgear extender firmware update process. The first is by using the Manual method and the second is by accessing the Nighthawk app.
As you keep reading this article, you will get to learn about both methods in detail. So, you should not wait anymore. Refer to the section below.
Using Manual Method
- First of all, make sure that your extender is well-connected to the wall socket.
- Also, the power button on the extender should be switched on.
- Once you have assured both these things, connect the networking devices.
- Use an Ethernet cable for the connection between your devices.
- Then, pull up an internet browser.
- You can do so either on a computer or laptop.
- Access the address bar and enter mywifiext.net.
- Hit Enter.
- Whenever you find yourself on the login page, enter the required details.
- Hit Sign In.
- Go to Settings.
- The Firmware Update button can be located under the Maintenance section.
- Click on it and wait for some time.
Throughout the Netgear extender firmware update process, make sure that your system is accessing Netgear_ext. Otherwise; you will face the firmware update failure issue.
Via Nighthawk App
- If you have not downloaded the Nighthawk app on your phone yet, do it now.
- Once that is done, make your way to its login page.
- You can do so by creating a Netgear account.
- And then, you need to use the default username and password.
- Tap the Log In button.
- Before you even know it, the Settings page will appear.
- Go to Administration.
- Click Look for Updates.
- Once you see that a firmware update is available, tap the option.
- Hold on for some time.
As soon as the firmware of your Netgear wireless range extender is finished getting updated, then your device will reboot. Let it reboot patiently. Do not switch it off amidst the process. Or else, the same thing will happen that was mentioned before.
Despite the precautions that you took, if you still fail to update the firmware of your Netgear extender, then the following hacks will be useful.
How to Fix Netgear Firmware Update Failed Issue?
- Sufficient Power Supply
Make sure that your Netgear extender is properly connected to the wall socket. If you see that the power cord connecting the Netgear extender to the router is damaged, then you should replace it without giving it a second thought.
- Switch Connection Source
Another way through which the Netgear extender firmware update failure issue can be resolved is by changing the connection source. Although it is always suggested to use an Ethernet cable to connect the networking devices, still for some, it does not work well.
Therefore, you should switch to a different source of connection. To be specific, use a wireless source. Once done, try to update the firmware of the extender.
- Access Right Network
Another common mistake that users make while performing Netgear extender firmware update is not accessing Netgear_ext SSID. You might have stepped onto the same thing. To fix it, it is advised that you access Netgear_ext SSID. If you are not accessing it, there is no way in hell that you will be able to update the firmware of your device.
- Avoid WiFi Interference
Last but not least, an incorrect location of the Netgear extender can also give you a reason to worry because of the firmware update failure issue. Therefore, consider relocating your device. While the relocation is happening, cordless phones, washing machines, fish tanks, treadmills, televisions, and mirrors should be kept away from the extender.
For your information, even if you have done Netgear EX6200 setup in your home, these hacks can be implemented for all Netgear extender models. You can rely on us for that.
Wrapping Up
Our guide based on how the Netgear extender firmware update failure issue can be fixed has ended. We are keeping our hopes high that this article helped you out. By any chance, if it did not; you can try the ultimate hack. That hack requires you to restore your Netgear wireless range extender to the factory default settings. It will work for you for sure.
